 |
| WiPhone - W880 |
|
WiPhone - W880 Specifications
| Characteristic |
Specification |
| Protocol: |
SIP (RFC3261), DHCP, IEEE802.11b |
| Wireless Access Protocol: |
CSMA/CA |
| Codec: |
G.711/G.729A |
| Battery: |
3.6V, 1350mAhr Lithium |
| Battery Life: |
3.2hr Talk Time, 21-23hr standby |
| Frequency Range: |
2.4-2.497 GHz |
| Data Rate: |
802.11b Direct Sequence Rate scaling at 1,2,5.5, and 11 Mbps |
| Release Output Power: |
RF output 30mW peak |
| Dimensions: |
(H)5.0" x (W)1.8" x (D) 0.8" |
| Weight: |
Around 110g |
| Display: |
LCD 112x64 Graphic Mode w/backlight |
| Buttons: |
0,9,#,*,9 function, 2volume Keys |
| Notification: |
Ringer/Vibration |
| Ports: |
Ear-Phone Jack, mini-USB port |
| Security: |
Wired Equivalent Privacy (WEP) 64 and 128 bit |
|
| |
| |
 |
| WPG-2400 / WPG-1880 (Digital Cordless Phones) |
|
Digital Cordless Phone - WPG Series Specifications
| Characteristic |
Specification |
| Models |
- WPG-1880: 1 WAN (10/100M bps), 1 LAN (10/100M bps), 1 PSTN and 1880MHz
- WPG-2400: 1 WAN (10/100M bps), 1 LAN (10/100M bps), 1 PSTN and 2.4GHz
|
| Protocol |
- Support SIP 2.0 (RFC3261), TCP/UDP/IP, RTP/RTCP, HTTP, ICMP, ARP/RARP, DNS, DHCP (both client and server), PPPoE, STUN, NTP, TFTP
- Support layer 2(802.1q VLAN, 802.1P) and layer 3 QoS(TOS)
- Support STUN for automated NAT traversal
- Support device configuration via built-in IVR, web browser or telnet
- Support firmware upgrade via TFTP or HTTP
|
| Telephony Features |
- Power digital processing (DSP) to ensure superb audio quality
- Advanced adaptive jitter control and packet loss concealment technology
- Support static IP, DHCP and PPPoE
- Support various vocoders including G.711(a-law and u-law), G.723.1(5.3/6.3K), G.726, G.729A/B and iLBC
- Support caller ID/name display or block, call hold, call waiting, flash, call transfer(blink/consultative), call forward, in-band DTMF, dial plans
- Support fax pass through and T.38 (pending)
- Support silence suppression, VAD(voice activity detection), CNG(comfort noise generation), Line echo cancellation(G.168) and AGC(automatic gain control)
- Support standard encryption authentication(DIGEST using MD5 and MD5-sess)
|
| Phone Features |
- Speed Dial
- Chain dialing of multiple stored numbers
- 15 selectable ring tone
- Auto Answer on removal from base station
- Page handset
- Intercom to handset
- Handset speakerphone
- English lattice-point glass display
- Phonebook
- Base Dimension: 10.8x7.5x2cm
- Ultra compact and lightweight design for travellers
|
|
| |
| |
 |
| DVG - 100 (DECT VOIP Gateway) |
|
Dect VoIP Gateway - DVG-100 Series Specifications
| Characteristic |
Specification |
| Models |
- DVG-111: 1 WAN (10/100M bps), 1 LAN (10/100M bps) and 1 PSTN (RJ-11)
- DVG-121: 1 WAN (10/100M bps), 2 LAN (10/100M bps) and 1 PSTN
|
| DECT Features |
- GAP Compatible
- Base can register up to 5 Handsets
- Handset can be registered to 4 Bases
- Intercom calls during external calls
- Call transfer between handsets
- Paging
- 4 Digits handset & Base PIN
- Up to 8 digits authentication code for registration
- Range - Outdoor: 300 meters; Indoor:50 meters
|
| IP Phone Features |
- 1 WAN, 1 LAN and 1 PSTN
- Support H.323V4 or SIP
- Support static IP, DHCP and PPPoE
- NAT support
- Peer-to-peer IP call
- Fast Start and H.245 Tunneling
- Caller ID (show IP on DECT handset)
- Microsoft Netmeeting V3.0 compatible
- G.711, G.723.1, G.729 codecs
|
| Caller ID Features |
- Phonebook Memory 50 locations
- CID 50 locations
- Call waiting(optional)
|
| Telephone Features |
- 14-segment & 12-digit / 10 Symbols
- Hands-Free function, On-hook dialing with editing
- 12 Numeric keys & 8 Function keys
- PBX access code (up to 4 digits)
- 9 Ring Melody
- Support multi languages in Caller ID
- Pulse/DTMF Dialing Flash time programmable
- Low-battery & out-of-range warning display
- Adjustable Ringer volume & melody
- Dialing pause time (3/5 seconds)
- 100 hours standby time & 8 hours talk time
- Adjustable receiver volume (9-levels)
- LCD 2 lines
- Call duration time, Mute function
- 3*AAA battery
|
| Memeory Features |
- Redial memory (3 locations, 20 digits)
- Caller ID memory (50 locations, 25 digits)
- Phonebook memory (50 locations, 25 digits)
|
|
| |
| |
 |
| AGG - 102 |
|
Analog GSM Gateway AGG-102 Specifications
| Characteristic |
Specification |
| Features: |
- Provide direct connectivity to GSM or CDMA network
- Allow instant provisioning of PSTN access or termination
- An excellent substitute of PSTN line, especially for rural areas
- An excellent companion of BroadTel RPA-2E1S1O for PSTN termination
- Support PIN code and reciprocal locking of phone card
- Support polarity reversal signal for metering and billing
- Support alerting of incoming calls
- Support duration display
|
| Air interface stanard: |
GSM or CDMA 900/1800 MHz phase 2+ |
| Frequency Ranges: |
- GSM900 Transmit: 890~915MHz
- GSM900 Receive: 935~960MHz
- GSM1800 Transmit: 1710~1785MHz
- GSM1800 Receive: 1805~1880MHz
|
| Channel Space: |
200KHz |
| Sensitivity: |
-104dB |
| Power Consumption: |
static <=25mA, emission <=500mA |
| Antenna Gain: |
3.5dB(all directional |
| Peak Power Consumption: |
2W |
| Antenna Connector: |
SMA (BNC optional) |
| Telephony Interface: |
FXS: 2 x RJ11 |
| Dimensions: |
(W) 16 x (H) 3 x (D) 12 cm |
| Weight: |
Around 500g |
| Display: |
LCD 112x64 Graphic Mode, Backlight |
| Power: |
AC 100~240V 50~60Hz |
|
|